N6iii Firmware v1.21 Update

New Functions and System Optimization

1.Added new functional and UI adaptation to support the E203 Audio Motherboard;

2.Fixed the delay audio output issue where user unplugged headphones during playback, adjusting the volume, and then reinserting the headphones.

3.Fixed the incorrect screen orientation issue when automatic screen rotation was enabled.

4.Update the selected User Interface.

5.Other bug fixes and optimizations

Firmware Update

Cayin will release firmware updates to enhance and optimize N6iii as deemed required. Users can update the firmware through OTA or local updates. To manually download the firmware, please visit the SUPPORT center on our official website and please make sure you select “Personal Audio” on this page.

Attention

· Please make sure the device has not less than 30% battery power, otherwise please charge up the player before you proceed to a firmware update.

· Please make sure your N6iii has more than 2GB of storage before the firmware update.

· Do not operate the device during a firmware update.

· During a firmware update, the device will turn off and reboot automatically. If the device does not reboot 3 minutes after being turned off, please press and hold the POWER BUTTON for 

   3 seconds to boot up the device, the device will resume the firmware update process.

· Please delete the firmware file from the TF card or internal storage after you have completed the firmware update process

OTA Update Procedures

1. Connect the N6iii to the internet via Wi-Fi.

2. Enter the Settings menu, and then proceed to “System” -> “Wireless Update”.

3. Press “Check for updates”, and the system will check for new firmware.

4. Press “Download” when your DAP detects new firmware. The N6iii operating system will download the new firmware as instructed

5. Press “Install now” after the firmware is successfully downloaded.

6. Press “OK” at the pop-up dialogue, and the system will start installing the new firmware.

Local Update Procedures

1. Download the latest firmware update package from the SUPPORT center of Cayin’s official website, you should receive a compressed file as a zip file which is used for the 

    N6iii firmware update.

2. DO NOT decompress the zip file.

3. Copy the firmware file into the root directory of the N6iii internal memory or TF card, and insert the TF card into the N6III before you proceed to the next step.

4. Enter the Settings menu, and then proceed to “System” -> “Wireless Update”.

5. Press the “┇” icon on the top right corner of the screen.

6. Select “Local updates” in the pop-up menu.

7. Proceed to the directory where the firmware file is located, and then select the firmware file.

8. Press “INSTALL NOW”.

9. Press “OK” at the pop-up dialogue, and the system will start installing the new firmware.