Location:Home > Support > DownloadDownload
Version:Announcement of Cayin N3 firmware v1.1
Date:2017-04-06 03:04:55
Update log


Announcement of Cayin N3 firmware v1.1


New Functions and System Optimization

1. Add new ReplayGain function to normalize the output level of different recording, making sure the volume output will maintain at minimum


2. Add two set of UI themes, users can now select their preferred theme from System setup menu

3. Support multi-channel WAV format

4. Allow user to terminate Bluetooth scanning by the Return key.

5. Set volume to maximum and disable volume control when N3 DSD output was set to DoP mode, and N3 is in digital output operation 

   (S/PDIF and USB Audio).  When the player falls back to other operation mode (PO/LO), system will reset volume back to previous setting 

   and enable volume control again.

6. Enhance file selection mechanism of shuffling playback mode


Cayin N3 Firmware Upgrade


· Each version of firmware might contain minor different, consumer please decide on your own accord whether you need to update the firmware

  of yourN3 DAP.

· Under normal circumstances, firmware upgrade will not cause any damage to user information, but Cayin cannot exclude the possibility of 

  upgrade failure due to mal-operation or any other reason. For these reasons, you might be required to format your N3 DAP and result in 

  losing person data stored on the player.We strongly suggest you backup all your personal data stored on the player before you perform 

  firmware upgrade.

· The N3 firmware cannot be used in other product, and the firmware from other product cannot be used in N3


Firmware upgrades procedure


1. For safety reason, please make sure the N3 DAP has not less than 50% battery power before you proceed, otherwise please charge up the 

    player before you upgrade the firmware

2. Download the latest firmware from Cayin website (www.cayin.cn). Decompress and copy the N3 firmware file (update.upt) into the root 

    directory of a TF card.

3. Insert the TF card into the N3 DAP and complete your firmware upgrade with either one of the following steps:

· While N3 has been turned on, select “System Setup” and scroll all the way to the bottom of the list, select “System Update”, 

   the system will complete the upgrade process automatically, and reboot the player after update is completed.

· While N3 has been turned off, hold the round physical “Enter” button, and then hold the “Power on/off” button, the system 

   start the firmware upgrade process and will complete the process automatically.  It will reboot the player after update is completed.


Noe: N3 can support FAT/FAT32/exFAT/NTFS formatted TF card during the firmware upgrade process.


When the upgrade is completed, you can verify the current firmware version number by selecting “System Setting” menu, under “About the Player and storage information” option, check out the “Firmware Version” detail.



· Do not operate the machine during firmware upgrade

· Please delete/remove the firmware file from the TF card after firmware upgrade

· Please update your Music Library after firmware upgrade


Follow us