Location:Home > Support > DownloadDownload
Version:Announcement of Cayin N8 firmware v2.1
MD5:
Size:36.6MB
Date:2018-12-25 01:12:34
Update log

1545359161420672.jpg


Announcement of Cayin N8 firmware v2.1


图片1.png


New Functions and System Optimization

1. Add new pull down menu for Bluetooth DAC (Rx mode) and USB DAC function, enable users to adjust gain settings, timbre (tube/SS), Output mode (P/P+) and BAL output option (PO/LO) in the pull-down menu.

2. Relocate the Music Setting and System Setting options from previous pull-down menu to a newly created pull-up menu from bottom of screen.  

图片2.png


3. Revise System wallpaper/album art

4. Bug fixed: Bluetooth will accidentally turned on when charging during power off

5. Other Bug fix and optimizations

 

Firmware upgrades procedure

Cayin will release firmware upgrade to enhance and optimize N8 as deem required, the new firmware can be acquired through OTA or manual download, since the content of these firmware are identical, you can select whichever upgrade option that fit your needs.

 

Please make sure the device has sufficient battery power before you proceed.  Please confirm the device has not less than 50% battery power; otherwise please charge up the player before you proceed to firmware upgrade.

 

Option 1: Local Upgrade Procedures

1. Download the latest firmware upgrade package from Cayin website (www.cayin.cn), you should receive a compressed document N8 firmware XXXX.zip

2. Decompress the zip file and extract the N8 firmware file (update.upt)

3. Copy N8 firmware file into the root directory of N8 internal memory or TF card, insert the TF card into N8 before you proceed to next step.  

4. Select System upgrade from System Setup menu, when prompted by the system, select “update via micro SD card”.  You will be asked to confirm your selection, select OK to proceed.

5. The system will start the firmware upgrade immediately, you can monitor the process through the Updater progress bar.  

6. The player will reboot into main menu when the firmware upgrade is completed. Please verify the firmware version number which is displayed under “About” option of pull down menu.

 

Option 2: OTA Upgrade Procedure

1. Connect N8 to an Internet ready WiFi connection

2. Make sure your N8 internal memory has at least 100MB available storage

3. Select System upgrade from System Setup menu, when prompted by the system, select “OTA upgrade”.  The player will detect if there is a new firmware available.

4. If a new firmware is available, the player will display “Found new firmware XXX” at the top of the screen, select Download to proceed.

5. At the end of the download process, the system will prompt you to confirm “Update firmware now?” Selecting “OK ” to proceed.

6. The system will start the firmware upgrade immediately, you can monitor the process through the firmware upgrade screen.

7. The player will reboot into main menu when the firmware upgrade is completed. Please verify the firmware version number which is displayed under “About” option of pull down menu.

 

Attention

· N8 can support FAT/FAT32/exFAT/NTFS formatted TF card during the firmware upgrade process.

· Do not operate the machine during firmware upgrade

· Please delete/remove the firmware file from the TF card after firmware upgrade

· Please update your Music Library after firmware upgrade

· If N8 is in charging status, the player will not reboot to main menu after firmware upgrade.  It will stop at the battery charging page, you need to disconnect the USB charger to complete the firmware upgrade process.


Network
Follow us
Hotline
+86-756-3828711
English